DISKLOK
RAMP POST PROTECT YOUR PROPERTY
ORDER
NOW >>>
FITTING GUIDE
YOU WILL NEED A SELECTION
OF TOOLS TO CHOSE FROM, DEPENDENT UPON THE TYPE OF GROUND INTO WHICH
YOU WISH TO INSTALL YOURDISKLOK SECURITY RAMP POST.
WE SUGGEST SOME OF THE
FOLLOWING WILL BE THE MOST SUITABLE:
> BOLSTER CHISEL AND HAMMER
> CROWBAR
> STONECUTTER
> ELECTRIC CHISEL
ALL THESE ARE AVAILABLE FROM TOOL HIRE COMPANIES IF YOU
DO NOT ALREADY HAVE THEM IN YOUR HOME.
1. PRIOR TO FITTING UNFOLD
THE LEGS TO THE VERTICAL POSITION
2. USING THE RAMP POST AS A TEMPLATE, MARK OFF THE POSISTION OF THE
POST LEGS IN THE FIXING AREA
3. EXCAVATE THE LEG POSITIONS TO A DEPTH OF 30CM AND INSERT. USE THIS
POSITION TO MARK OFF THE FULL AREA OF THE COMPLETE UNIT AND EXCAVATE
TO A DEPTH OF 6.5CM AND FIT THE UNIT FLUSH INTO THE GROUND
4. FILL THE LEG HOLES WITH A CONCRETE MIX AND ALLOW SUFFICIENT CAVITY
BENEATH THE RAMP POST FOR DRAINAGE TO THE SUB SOIL OR AGGREGATE
5. SMOOTH OFF THE CONCRETE AS REQUIRED
6. DO NOT USE THE POST UNTIL THE CONCRETE HAS FULLY CURED
7. FULL INSTRUCTIONS ON MAINTENANCE AND INSTALLATION ARE PROVIDED WITH
EACH POST
BACK
|
